
Light
Weight Concrete Mix for Countertops
PERFORMANCE:
Counter Weight is a revolutionary concrete mix exclusively
designed for countertop applications. This innovative
mix was formulated to achieve what no ordinary mix
can: reduce the load on the countertop base, reduce
the time required to finish the countertop, dual function
as a pre cast or cast in place mix, take polishing
the day after the pour and deliver a top quality finished
product.
RESULTS:
Counter Weight is the first lightweight concrete mix
for countertops ever made. It provides beautiful finishes
with light vibrant colors, may be polished and readily
accepts integral colors, acid stains and dyes.
-
Weighs
up to 33% less than other standard concrete mixes.
-
High
Yield, up to 60% more area than a regular concrete
mix.
-
Ease
of fininsh and workability cuts in labor time.
-
May
be used for pre cast or cast in place countertops.
-
Faster
setting time allows for faster finishing and form
removal.
-
Installer
amy carry bigger pieces since weight is lower.
-
Accepts
acid stains and dyes the next day.
-
Ligh
color mix is easy to tint and produces brighter
colors.
-
May
be diamond polished the next day.
-
High
Strength Mix: 5500 PSI within 28 days.
DECOSUP
SEALERS FOR CONCRETE COUNTERTOPS
Decosup
manufactures specialty sealers for concrete countertops.
High gloss, low gloss, water and oil repellent impregnators
and high build epoxies.
We only offer top of the line products. If you are already
in the business you'll be very satisfied with these
products performance, if you are new to the business
you'll be able to start out with the confidence a good
product provides.
INTRA-LOCK:
The Ultimate Water and Oil Repellent, get amazing protection
and maintain the natural look of concrete countertops.
Resistant to oil, grease, juices and many other liquids.
Intra-Lock effectively protects against oil base stains
without changing the original color or appearance of
the concrete. Intra-Lock impregnates the substrate creating
a deep seated protective barrier against stains and
damage. Intra-Lock is a very low viscosity fluid easily
applied by brush, spray or roller: it dries without
forming a film at the surface while maintaining it's
permeability. It may be used on interior or exterior
applications.
How
does it work?
Intra-Lock works by penetrating and forming a sealing
layer below the surface, it effectively repels water
and oil like no other products. This pictures shows
an application of Intra-Lock on a bathroom vanity, Intra-Lock
is very effective even in a high moisture environment.
See how it protects the concrete while preserving it's
natural look.
FUSION:
A two part system featuring Fusion I (a primer) and
FUSION ll (a Water Base Aliphatic Urethane as a top
coat). This system provides with a very hard, chemical
resistant, low sheen finish. Virtually impenetrable
by kitchen wares it is resistant to oil, water, vinegar,
juices, cleaning chemicals and much more. It is a very
easy and fast system to apply, simply apply the primer
with a short nap roller or brush, allow to dry for about
45 minutes then apply the top coat with a sponge, several
coats may be applied to enhance protection. Fusion does
not darken the color of the surface, it's low sheen,
very scratch and chemical resistant, has virtually no
odor and it's safe to use indoors.
How
does it work?
Fusion is a two part system, a primer (Fusion I) and
a finish coat (Fusion II). The primer is used to prepare
the surface and ensure proper bonding. Fusion I has
an extremely small resin particle that allows it to
penetrate deeply into the concrete matrix and bond to
it. Fusion II is a water base Aliphatic Urethane that
provides a very hard and chemical resistance finish
with a soft satin sheen as seen in the picture. The
Fusion system is sold in One-Quart kits and may be applied
as soon as the next day after the pour.
TABLE
TOP EPOXY:
Table-Top is a 100% solids, two component, clear epoxy
coating for concrete countertops, wooden tables, concrete
furniture and masonry statuary. it provides with a high
gloss, high build finish. Each kit contains one gallon
of resin and one gallon of hardener. Table-Top cures
to a clear, high build, glass like finish that resists
scratching, yellowing and will not distort with age.
Items coated with Table Top will become permanently
preserved and protected for your enjoyment throughout
a lifetime. This product will not exhibit blushing or
sweat out under high humidity conditions. Table Top
is commonly seen on bar tops and tabletops in many bars
and restaurants.
How
does it work?
Table Top is a high build epoxy finish for countertops.
It's 100 % solids and sold in in an easy to mix 1 to
1 ratio. It is offered in Two-Gallon kits. Table Top
provides a hard, high build finish for your countertops.
It is easy to apply and it allows you to place objects
such as coins, paper and thin articles within the sealer
to enhance your finish while providing a high gloss,
scratch resistant protective coat.
Technical Data Sheets:
Counter
Weight
Intra-Lock
Fusion
Table
Top
|